You better go balls out with it. You need to have a closet with 6 or so kegs in it and then run lines to a tap tower that is also instantly cooled.

ask Bigfan.

just go to a Portillo's and steal shit off the walls.

send Bigfan a pm.

Hello friends!

I'm looking to add a little bit of flair (WOOOOOOOOOOOOOOOOOOOOOOOOOOOO) to my already finished basement. It lacks a nice bar. I would like to put said bar in said basement and put down some hard-ward flooring as well. I have a full bathroom already and plenty of space, it is also a walk-out. Any suggestions on who to call? Any warnings? Any hints? Any surprises I should look out for? Scams? What to ask? I needs too know.

And this is not an elaborate scheme to get JORR to come over to my abode and give me classic a one legger, I prefer two and only after the second visit.

Thanks, dudes.

Can I please be all up in your house? I'm sayin...let me chill all up in yo crib and shit. Seriously. I mean, I want free reign to go through your fridge and walk barefoot and pantless in your place of residence.

I don't think you understand...I want to be in your house and not really have to ever leave for any reason.

That and flip-flops.

7:00 or 8:00 work better for you?

Damn. I didn't know you were really planning on coming.

Damn. I didn't know you were really planning on coming.

Damn. I didn't know you were really planning on coming.


....

Let's go to Jeff's bar with the sports pennants and watch VHS tapes to celebrate New Years 1992!!

I guess my help is not needed because Someguy usually has all the answers, but in case anyone else is building a bar.

1. Draw out what you want for the basic structure. H-W-L and then go find a framing contractor to build a basic box, structurally sound. This is the cheap way or hire someone. So if you have any basically skills and tools you can so this from Plywood and 2x4's.

2. Now go and HIRE a Trim carpenter. Get some oak on the counter top and any decent trim carpenter should be able to make it look great in one day.

3. Stain the wood, after filling the holes with wood filler. Make sure you sand before you stain and then again after.

4. Polyurthane with SPAR VArnish everything but the top. 3 coats is best.

5. Here is the Secret. Go to Menards and by ENVIRO TEX. It is clear coast 2 part epoxy. This is what they use at Bars to get that thick coat on the top of the bar, or they put something underneath and that 1/4 inch thick clear is on top. You can use this one the edges of the top etc.

Once again this info is for anyone else other than SOMEGUY, who might be thinking about building a bar.

I would use OAK with a dark stain. You can also Buy bar foot rest for the bottom fairly cheap.

I would use OAK with a dark stain.

You an oak man, biggie?

As an addendum, I plan on doing none of this myself.